How To Connect A Green Mountain Grill To WiFi?: (The Complete Guide)

How To Connect A Green Mountain Grill To WiFi
( Disclaimer: As an Amazon Associate, we earn commissions from qualifying purchases at NO additional cost to the customer.)                                          

Understanding how to connect a Green Mountain Grill to Wifi is going to make your life much easier.

You’ll be able to fully control your grill and get the most out of it, make modifications to how your grill works, and check on temperature readings from the comfort of your couch rather than having to constantly come back outside to check readings.

Connecting your Green Mountain Grill to Wifi is relatively straightforward and simply requires that you download the Green Mountain grill app for your iPhone or Android. 

Then follow the instructions on the screen based on the type of grill you purchased.

How To Connect A Green Mountain Grill With Mobile Phone?

If you don’t have a Wifi connection or it doesn’t reach your Green Mountain grill, you’ll need to figure out how to connect a Green Mountain grill to Wifi locally rather than using your home Wifi connection.

Luckily the Green Mountain grill can be connected to via local Wifi that is just point-to-point between your grill and your mobile phone.

This doesn’t give the same range as traditional Wifi, but it still gives you full control over the grill to turn it on, adjust temperature ranges, and perform everything else through the mobile app.

1.Download the Green Mountain Grill app from the Apple Store or Google Play store.

2. Power up the control panel on your Green Mountain Grill.

3. Get your Green Mountain grill password, which is the serial number located on the back of your grill, most likely on a green sticker.

4. Using your phone, connect to the “GMG” wifi network.

5. Open the Green Mountain Grill App.

6. Click “Connect” in the app.

7. Test that the app can control the Green Mountain Grill by turning it on from the app.

Anybody within range of your Green Mountain grill can connect to it using a mobile phone as long as they have the password to the local Wifi network, which is the serial number located on the back of the grill.

The benefit of connecting locally is that you can create profiles for different people for their own grilling needs and even create profiles for the items you want to cook.

So, with a simple click on a specific item, you can set the exact temperature and timings that you want.

If you have issues connecting to the grill, you can try rebooting your phone and switching your grill off and turning them both back on, and trying again.

How To Connect A Green Mountain Grill To Wifi?

The first step in how to connect a Green Mountain grill to Wifi is to ensure that your Wifi connection can reach where the grill is; simply take your mobile phone and check that it can connect with good reception to the Wifi you’re hoping to use.

If your Wifi connection doesn’t reach or has poor reception, you’ll need to move the router or grill closer together or look for a Wifi extender to get the signal reaching your Green Mountain grill.

Once you’ve determined the Wifi connection is possible, you need to connect to your grill:

1. Download the Green Mountain Grill app from the Apple or Android store.

2. Power up the control panel on your Green Mountain Grill.

3. You’ll need the password for your grill, which is the serial number located on the back of your grill.

4. Using your phone, connect to the “GMGl” Wifi network.

5. Open the Green Mountain Grill App.

6. Click “Connect” in the app.

7. Click “Settings” in the app.

8. Click “Wifi Mode” in the app.

9. Provide your Wifi network name and password.

Green Moutain Grill Not Connecting to Wifi?

If you’re having issues with how to connect a Green Moutain grill to Wifi, there are a few basic troubleshooting steps that you can perform or things you can check.

1. Reboot your Green Mountain Grill.

2. Reboot your Wifi router.

3. Double-check that the Wifi connection is strong enough.

4. You must use a 2.4Ghz Wifi connection, not a 5.0Ghz connection.

5. Change your Wifi security to WPA rather than WEP.

6. Your Wifi password shouldn’t be more than 40 characters.

How To Update Green Mountain Grill Firmware To Connect To Wifi?

When determining how to connect a Green Mountain grill to Wifi, you may find there are issues connecting your grill to Wifi or getting all the features the app provides.

Feature issues can often come down to your grill having older firmware than the Green Mountain app will work with, so a quick update to your firmware is a great way to fix connection or missing feature issues.

1.Open the Green Mountain grill app.

2. Click “Settings” in the app.

3. Click “Update Grill” in the app.

4. If requested, provide your Wifi network name and password.

Your Green Mountain grill digital display should say “Upd” which indicates it’s about to start updating the firmware on your grill.

The digital display will start counting from 0 to 100 as it downloads and updates the firmware.

Once completed, it will say “SUC” for success on the digital display.

1.Turn your Green Mountain grill off and on to install the new firmware. If you get a “FAL” message during the update, it can be caused by a number of issues that you can check:

2. Your Wifi network password was incorrect; try again.

3. If your grill is further than 20 feet from your Wifi router, move it closer.

4. You already have the latest firmware version; check your version again on the Green Mountain grill website to confirm.

How To Check The Firmware Version On A Green Mountain Grill?

When following the how to connect a Green Mountain grill to Wifi instructions, you may find that a specific firmware doesn’t work with your Green Mountain app, or you simply want to make sure that you have the latest firmware to get the most out of your Green Mountain grill.

To check the Green Mountain grill firmware version, you can follow these instructions:

1.Flip your power toggle switch to off.

2. Hold the UP arrow and flip the power toggle switch to on.

3. Keep holding the UP arrow until the digital display shows the version.

If your Green Mountain grill doesn’t have a power toggle, you can simply unplug and replug the power cord in those steps.

If the digital display doesn’t show any version number, then you should update your firmware using the steps provided in the section above.

Your mobile app will alert you when a firmware update is required, so you shouldn’t need to check manually, though if you want to get the latest features, it’s worthwhile to check and update your firmware often.

How To Reconnect Green Mountain Grill To Wifi?

In some situations, your Green Mountain grill may lose connection to the Wifi due to fault, firmware issues, or just sometimes things disconnect and need to be reconnected.

Your first option should be to unplug your grill from the wall for at least 1 minute and then see whether plugging it back in reconnects it.

If the hard power reset didn’t reconnect your grill, you can reset the Wifi connection on the grill to factory settings or point-to-point connections.

1.Power off your Green Mountain grill.

2. Push and hold the FOOD button.

3. Power on your Green Mountain grill.

4. After about 15 seconds of holding the FOOD button, the digital display should start counting up from 0 to 1000, and you can release the FOOD button.

You can then go through the steps provided in the how to connect a Green Mountain grill to Wifi steps above so that you can get your grill connected again.

This is also the best option if you move houses, change your Internet provider or your Wifi changes for some reason, and you can no longer connect to the grill.

Just reset and reconnect the Green Mountain grill; it’s a quick and easy task.

How to Use Server Mode on Green Mountain Grill?

Green Mountain Grill Server mode is officially released to the users.

Following are the steps to getting on server mode.

1.Connect by Point to Point.

2. Then connect to your Home WiFi.

3. Once you connected to Home WiFi, go to the Settings screen and you will see a button that says “Server Mode” (Here Server mode button replaces the WiFi mode button when you connected to your homes WiFi).

4. Press Server Mode key, confirm the network.

5. Allow the app about 30-45 seconds to connect to the GMG Servers.

Related Questions

Where is Green Mountain Grill WiFi password?

You can find the Green Mountain Grill WiFi password on the back of the digital control of the WiFi retrofit kits.

You can also find as the serial number on the green plate on the back of the grill exterior.

Can you connect multiple phones once a grill is on home wifi?

No, you can’t connect multiple phones once a grill is on home wifi. You can only connect one phone at a time.

When a new device connects it will start on another phone. The grill is active on the last device that you connected to it.

If you use the grill away from home, still can you connect to directly to home WiFi?

 No you cant connect the grill to Home Wifi when you away from home. The grill must be in point to point mode for connection of device directly.

For restoring the P-to-P mode, check the GMG network you’ll require to reset the WiFi dogotal controller.

Sources:

https://greenmountaingrills.com/wifi-app/

https://greenmountaingrills.com/wp-content/uploads/2015/01/localwifiappmanual.pdf

 

Related Articles:

How To Clean Green Mountain Grill?

Green Mountain Grill Igniter Not Working?

Green Mountain Grill Auger Making Noise?

Green Mountain Grill Thermal Sensor Problems and Its Solutions

Green Mountain Grill Davy Crockett Modifications

Recent Posts