The model number on a Masterbuilt smoker can provide access to warranties, support, and manuals.
Your model number may differ between other smokers that appear exactly the same, and this is often due to which store sold the smoker to you, rather than actual differences.
If you’re asking where is the model number on a Masterbuilt smoker, the quick and easy answer is that it’s located on a silver label on the back of your smoker.
Who Makes Masterbuilt Products?
Masterbuilt was acquired by The Middleby Corporation in December 2021, along with Kamado Joe.
The two brands join Lynx, Viking, Josper, and EVO to form a powerhouse outdoor residential cooking offering from their parent company The Middleby Corporation.
The Middleby Corporation is a worldwide designer, builder, and seller of commercial foodservice equipment, and thanks to recent acquisitions, it’s moving into the residential food application space.
The benefits to Masterbuilt are a larger backing of research and development into products and expanding the userbase of the products.
In addition, it will allow faster development of new products, enhancements to existing products, and superior support to customers.
Where Is The Model Number On A Masterbuilt Smoker?
If you’re curious where is the model number of a Masterbuilt smoker, you’ll be relieved to know it’s easily found on the silver label on the back of all Masterbuilt smokers.
In the event that this label is not visible or has been damaged, you can check the manual, receipt, or packaging for the model number.
You can also call the store you purchased it from to get the model number from them.
If you’ve previously registered your model number with Masterbuilt, you may be able to contact them with your information, and they should be able to pull up the model number and serial number that you previously registered.
It’s typically only required if you need to look up the manual for the smoker, register your smoker for its warranty, get replacement parts, or understand exactly which model you have and what features or modifications you can make to it.
Register Your Masterbuilt Smoker For Warranty
If you’re hoping to get support from Masterbuilt for any issues or warranties, you will need to register your purchase with Masterbuilt on their Product Registration Page.
Once there, you will need to provide a copy of your purchase receipt, model number, and serial number.
The serial number of your Masterbuilt smoker will be located on the same silver label on the back of your Masterbuilt smoker.
Get Your Masterbuilt Smoker Manual
If you’re looking for a manual for your Masterbuilt smoker, you will find it requires the model number, and that’s why you may be asking where is the model number on a Masterbuilt smoker, and you now know it’s on the silver label on the back of your Masterbuilt smoker.
Get over to the Product Manuals Page and enter your model number to download a manual with all the information you need on your Masterbuilt smoker, including details on replacement part numbers.
Does Masterbuilt Make Smoke Hollow?
In 2017 Masterbuilt acquired Smoke Hollow, so since that time, they have been made under the banner of Masterbuilt, and Smoke Hollow no longer exists as an independent company. Masterbuilt also provides the support and warranties for Smoke Hollow products now.
You will find Smoke Hollow branded smokers and accessories still in stores like Home Depot, Lowes, Walmart, and many others, but it’s been some time since these weren’t just rebadged Masterbuilt smokers.
The actual offerings of Smoke Hollow have been reduced over the past few years, and the technology has been implemented into Masterbuilt smokers, so when you look at both smokers, they are almost identical outside of the tabletop smokers that are exclusive to the Smoke Hollow brand.
If you require support or to register your Smoke Hollow smoker, you will need to find your receipt, model number, and serial number.
The model number for Smoke Hollow smokers can be found on the silver label located on the back of the smoker.
Over time it’s likely that Smoke Hollow will completely disappear as fewer people purchase them and remember the brand. It’s a better option in the long run for replacement parts and support to stick with new Masterbuilt smokers.
How Do You Sync A Remote To A Masterbuilt Smoker?
If you have a digital electric Masterbuilt smoker, you will get a remote control for the smoker, you may need to sync the remote to your Masterbuilt smoker, or if you get a replacement remote or control unit, you will need to sync them together.
If you have difficulties while you sync the remote to your Masterbuilt smoker, you can reset the process and start again.
To reset, simply unplug your smoker, wait ten full seconds, plug the smoker back in, and you can start the sync process from the beginning.
Sync A Remote To A Generation 1 Masterbuilt Smoker
To sync a remote to a Generation 1 Masterbuilt smoker, follow these steps:
1.On your Masterbuilt smoker control pad, push the “set temp” button and hold it until it beeps.
2. On your remote, push the “meat probe” button, then the “light” button, then the “meat probe” button again, and then the “light” button again.
Sync A Remote To A Generation 2 Masterbuilt Smoker
There are two methods to sync a remote to a Generation 2 Masterbuilt smoker.
To determine which method you use, check the model number and serial number on the silver plate on the back of your Masterbuilt Smoker.
If your model number ends in 04, you can use the Generation 1 remote sync method.
If it ends in 23, then you need to use the following method.
1.Turn off the Masterbuilt smoker controller.
2. Turn off the Masterbuilt remote.
3. Push and hold the “set temp” button on the controller until it beeps.
4. On your remote, push the “meat probe” button, then the “light” button, then the “meat probe” button again, and then the “light” button again.
Sync The Masterbuilt Classic App To New Masterbuilt Smoker
Newer Masterbuilt smokers no longer come with a physical remote; you will need to use an iOS or Android device as the remote control for your Masterbuilt smoker.
- Connect to a 2.5G WIFI Network
- Enable Bluetooth
- Download the Masterbuilt app from your phones app store
- Click the + or Add Device button on the app and follow the steps provided
If there are issues connecting your Smoker to your mobile device, reboot the phone, unplug, and plug your smoker in to ensure everything has been reset.
Ensure that you have good WIFI connectivity in the location; otherwise, you will need to move your smoker closer to your router.
Test Your Remote With Your Masterbuilt Smoker
Once you’ve synced your remote or mobile device to your Masterbuilt smoker, you should be synced and ready to test.
Go through all of the buttons and options on the remote to ensure everything works as expected.
Related Question
How long do Masterbuilt smokers last?
Masterbuilt smoker lasts longer if it cares properly. This smoker will last as long as the components last.
The generation 1 Masterbuilt model have the longest track record of trouble free use.
Surely you need to protect it from the elements when not in use.
But the life span of Masterbuilt smoker is roughly anywhere from 3 to 10 years. It totally depends upon how you store and care for it.
Can you use an extension cord with a Masterbuilt electric smoker?
Yes, you can use extension cord with Masterbuilt smoker.
Extension cords can be used to power your electric smoker as long as the extension cord can safely transmit at least 12.5 amps of current.
Usually, most extension cords that have a wire gauge of 16, 14, or 12 can safely power an electric smoker.
So, you can use extension cord with 12 gauge wire with your Masterbuilt smoker.
Source:
https://www.masterbuilt.com/pages/faq
https://www.masterbuilt.com/pages/app-device-requirements
Related Articles:
Masterbuilt Smoker Not Turning on?
Masterbuilt Smoker Mailbox Mod?
Masterbuilt Smoker Dual Fuel Smoker Modification
How to Connect to Masterbuilt Bluetooth App to Masterbuilt Smoker?
