Whatever the season is, with a perfect grill, you will experience great family bonding.
I know, you did all your research about your new grill and invested in a high-quality Pit boss pellet grill for healthier and tastier food.
Then one day, a weird message Like “ErH” or “ErP” error code came on the Pit boss digital display.
Then you might be wondering, what does ErH or ErP mean on my Pit Boss?
In this article, we’ll explain more in detail about these Pit Boss Error codes.
About Pit Boss Brand
Pit Boss was founded in 1999 by Dan Thiessen that manufactures a wide range of grilling equipment like charcoal, pellet, and gas grill.
All of these types of grill Pit Boss is renowned for pellet grills.
Pit Boss is a subsidiary of Dansons Inc. They also make Louisiana grills.
While manufacturing, the Pit Boss brand focuses on simplicity and affordability. They provided a lot of affordable grill options.
Now it started to incorporating remote settings that use Bluetooth on the Platinum line of grills in 2020.
What Does ErH Error Code Mean on Pit Boss Pellet Grill?
If your Pit boss pellet grill shows, “ErH” error code, then there is something wrong happened inside your pellet grill.
But did you know, what does the “ErH” mean on Pit Boss?
“ErH” error code on Pit boss simply means, there are heat and temperature control issues of the Pit Boss pellet grill.
When the Pit Boss shows such a message, there are two possibilities-
- The pellet grill is overheating due to excess fuel or grease fire.
- Temperature probe wire not making a connection.
So, if your Pit Boss pellet grill shows, ErH error code, you might have one of the issues above mentioned.
You need to fix it soon so that it won’t be an obstacle in your pleasant grilling experience.
How to Fix “ErH” Error Code on Your Pit Boss Pellet Grill?
“ErH” error code on your Pit Boss means there are two possibilities as I mentioned above.
Let’s get to know, how to fix this “ErH” code.
The Pit Boss pellet grill is overheating
If your Pit Boss shows an “ErH” error code, then it might be having an overheating issue.
The grill has overheated due to excess fuel loaded in it.
You can solve this issue by following steps:
- Turn off your Pit boss grill.
- Clean out the interior of the grill.
- Make sure the grill is completely cool down. Then take out the excess pellet from the firebox.
- Confirm that all components are positioned correctly.
There is also a possibility of a grease fire in a cooking chamber for showing the ErH message.
For resolving this issue, switch off the grill immediately. Wait for a while for flames to go out.
You can use baking soda or Kosher salt if they don’t extinguish properly on their own.
When you assure, the ovErHeating problem is resolved, now you need to clear the error.
For this, you should turn the dial to the “OFF” setting. Open the grill lid.
Wait for three to four minutes. Select the desired temperature.
Temperature probe wire not making a connection
If your Pit Boss is showing ErH message not due to ovErHeating, there could be another reason is temperature probe wire connection is not proper.
It is the outcome of an inappropriate connection between the probe wire and the temperature control system.
For this, make sure the probe wire is connected properly to the control.
Confirm the wire connection whether is attached to the control panel correctly. Also, you need to check for any damage.
What Does ErP Error Code Mean on Pit Boss Pellet Grill?
Sometimes you notice the “ErP” flashing error on your Pit boss.
You might wonder what does this means?
If the Pit Boss shows an “ErP” error it means, the Temperature Dial was not in the OFF position or it was still switched on when the grill was connected to AC power.
It also means a power outage occurred when the grill was operating.
This results in an inadvertent start error that causes halts the Ignition sequence.
This is one of the safety features offered by Pit Boss. It helps to prevent the unit from starting accidentally.
How to Fix “ErP” Error Code on Pit Boss Pellet Grill?
If your Pit Boss shows an ErP error code, you need to fix it.
Let’s get to know how to fix this ErP error code.
If you want to clear the ErP error code, you need to turn the temperature dial to OFF position.
Wait for two seconds, then set the temperature dial to smoke or as per your desired cooking needs.
If still there are ErP code shows on your Pit boss, it is recommended to contact customer service of Pit Boss.
This safety feature helps to prevent occurring the intentional starts.
Final Thoughts
So, now you know how to fix the ErH and ErP error code on your Pit Boss pellet grill.
The ErH code shows due to the pellet grill is ovErHeating, or the temperature probe wire not making a connection.
If the ErP error code shows on your Pit Boss, it means the grill is not turned off properly when it is last connected to the power.
It also means a power outage while the unit in use.
So, if you facing the ErH and ErP error code issues, you can resolve by fixing these issues by following the necessary steps mentioned above.
Even if they are still showing the error, you should contact the customer service of Pit Boss.
Also, you always need to follow care and maintenance instructions given by Pit Boss to get the most desirable outcomes from your grill.
Related Articles:
Rec Tec Error Codes and Troubleshooting
How to Fix FLAME Error on Camp Chef?
Why is My Pit Boss Pellet Grill Temperature Blinking?
How To Fix Pit Boss ErR Error Code?
Pit Boss Pellet Grill Augur Won’t Stop Running?